nebula

Re: How do you...

[n*]Savage_MF — Mon Oct 22, 2007 12:08 pm

Author: [n*]Savage_MF

Posted: Mon Oct 22, 2007 12:08 pm

i think you join the server then type /pb_cvarlist or something like that to see the settings.

Re: How do you...

[n*]Joe Mamma — Sun Oct 21, 2007 3:39 pm

Author: [n*]Joe Mamma

Posted: Sun Oct 21, 2007 3:39 pm

[n*]Capmax wrote:

yea youll get away with it on KT and WOC cos they have no cvar limits.

changing it isnt so much hacking/cheating, but if its set lower than 0.016 its deemed an unfair advantage in warleagues and any servers that follow there cvar limitations.

it changes on all servers mate...for example ive been playin allstars alot recently and on that server i have it set at the lowest limit 0.014 (which is very low)

for other servers i simply change it back once ive joined.

to be honest i think RtCW would only be fair if it had 1 standard config file which every1 uses...because u can change your cvars to match the servers, some people dont know about this...is that deemed as you using an unfair advantage?...i think so...but because people know about changing cvars and everyone has different settings it allways is gona leave gaps for exploits.

id be happy using a standard file...reason i change it is to lower the advantage stakes against really good players.

I just figured this out and I've been playing 2 years I only use this on WoC. On that server I feel I play at a disadvantage because my ping is over 200 and I'm playing against guys with pings of 23, so I think I'll keep the setting. How can you find out what a servers cvar settings are?

Re: How do you...

[n*]Capmax — Sun Oct 21, 2007 11:43 am

Author: [n*]Capmax

Posted: Sun Oct 21, 2007 11:43 am

yea youll get away with it on KT and WOC cos they have no cvar limits.

changing it isnt so much hacking/cheating, but if its set lower than 0.016 its deemed an unfair advantage in warleagues and any servers that follow there cvar limitations.

it changes on all servers mate...for example ive been playin allstars alot recently and on that server i have it set at the lowest limit 0.014 (which is very low)

for other servers i simply change it back once ive joined.

to be honest i think RtCW would only be fair if it had 1 standard config file which every1 uses...because u can change your cvars to match the servers, some people dont know about this...is that deemed as you using an unfair advantage?...i think so...but because people know about changing cvars and everyone has different settings it allways is gona leave gaps for exploits.

id be happy using a standard file...reason i change it is to lower the advantage stakes against really good players.

Re: How do you...

[n*]Joe Mamma — Sun Oct 21, 2007 7:43 am

Author: [n*]Joe Mamma

Posted: Sun Oct 21, 2007 7:43 am

[quote="[n*]Capmax"]

[n*]Joe Mamma wrote:

OK kids, hers what I found out and if this is old news I apologize. If you go into your cfg and change your seta m_pitch from .011 (default) to .003 (or what ever you feel comfortable with) the speed at which you look up and down is greatly diminsihed, but the speed at which you look side to side remains normal. Now, I don't know if this tweak is out of bounds on some servers and will get you kicked, but I don't see why it would. IMHO this should make consistent headshots easier.

id watch it if i were u joe....

m_pitch is a hackable config setting...let me explain

some servers limit m_pitch because if u set it to 0 your mouse will be locked at head height

infact most servers limit it to 0.016

so if u set yours to 0.03 youll be gettin banned from alot of servers....just a heads up mate[/quote

I got kicked from our server with thats setting. Even though it is OK to play on WoC with that setting, I'm going to switch it back. I don't want anyone to accuse me of cheating, although there are peeps on that server that have the same setting.

Re: How do you...

[n*]Capmax — Sat Oct 20, 2007 2:10 am

Author: [n*]Capmax

Posted: Sat Oct 20, 2007 2:10 am

[n*]Joe Mamma wrote:

Re: How do you...

[n*]Savage_MF — Thu Oct 18, 2007 5:17 pm

Author: [n*]Savage_MF

Posted: Thu Oct 18, 2007 5:17 pm

I need to look up fast to watch for Goomba attackers lol

Re: How do you...

[n*]Joe Mamma — Thu Oct 18, 2007 5:10 pm

Author: [n*]Joe Mamma

Posted: Thu Oct 18, 2007 5:10 pm

[n*]zdoqez wrote:

hmm, i ll try it on my test.cfg.

thnx for checkin out joe joe!!!

I think you can only use that tweak on WoC. Tried it on ours and Cvar was out of bounds.

Re: How do you...

[n*]zdoqez — Thu Oct 18, 2007 4:22 pm

Author: [n*]zdoqez

Posted: Thu Oct 18, 2007 4:22 pm

hmm, i ll try it on my test.cfg.

thnx for checkin out joe joe!!!

Re: How do you...

[n*]Joe Mamma — Tue Oct 16, 2007 2:59 pm

Author: [n*]Joe Mamma

Posted: Tue Oct 16, 2007 2:59 pm

OK kids, hers what I found out and if this is old news I apologize. If you go into your cfg and change your seta m_pitch from .011 (default) to .003 (or what ever you feel comfortable with) the speed at which you look up and down is greatly diminsihed, but the speed at which you look side to side remains normal. Now, I don't know if this tweak is out of bounds on some servers and will get you kicked, but I don't see why it would. IMHO this should make consistent headshots easier.

Re: How do you...

[n*]Ramsey — Tue Oct 16, 2007 1:14 am

Author: [n*]Ramsey

Posted: Tue Oct 16, 2007 1:14 am

You can change it in your config...though I cant remember what the "thingy" is.

http://www.configarmory.nl/armory/memory.html

Put that in your favorites...you should find it in there some place! This site has helped me loads!!

Re: How do you...

[n*]Joe Mamma — Mon Oct 15, 2007 11:14 pm

Author: [n*]Joe Mamma

Posted: Mon Oct 15, 2007 11:14 pm

[n*]Exxon wrote:

if u have a good mouse (e.g. gaming mouse) you can change your mouse sensivity on the Y axis (up and down) - don't know if he uses it, but I once used it with my razer mouse software - there's an option for setting different mouse sensivity on horizontal and vertical axis

I think thats what it is. I think you can change that in cfg, if I'm not mistaken. Wife will kill me if I buy a new mouse though

Re: How do you...

[n*]Exxon — Mon Oct 15, 2007 11:05 pm

Author: [n*]Exxon

Posted: Mon Oct 15, 2007 11:05 pm

if u have a good mouse (e.g. gaming mouse) you can change your mouse sensivity on the Y axis (up and down) - don't know if he uses it, but I once used it with my razer mouse software - there's an option for setting different mouse sensivity on horizontal and vertical axis

Re: How do you...

[n*]Joe Mamma — Mon Oct 15, 2007 1:27 pm

Author: [n*]Joe Mamma

Posted: Mon Oct 15, 2007 1:27 pm

Hmmmmmmmmmmm..... I'll try and figure it out and reexplain it

Re: How do you...

[n*]Savage_MF — Mon Oct 15, 2007 1:20 pm

Author: [n*]Savage_MF

Posted: Mon Oct 15, 2007 1:20 pm

no probs Joe, i was out until the early hours anyway so missed our rendezvous also. :s

I still don't get what you mean? When i look up i look straight up and same for down...i think.

Re: How do you...

[n*]Joe Mamma — Mon Oct 15, 2007 1:16 pm

Author: [n*]Joe Mamma

Posted: Mon Oct 15, 2007 1:16 pm

I was kinda a vague on that. If you look up and then down the area or angle I see is probably 45 degrees, arthurs seems to be about 15. He also seems to be REAL steady and I'm not. I hope that makes sense.

Hey Sav, sorry I missed getting on Saturday. Finally slept in until 8:30am